Schedule Your Service
505-278-6668

25 Years of Reliable Plumbing & Heating Service

Over 25 Years of Honest Service in Rio Rancho & Albuquerque

Toilet and Faucet Repair

Toilet and Faucet Repair in Paradise Hills New Mexico

A running toilet that won’t stop. A faucet that drips all night. A shower valve that’s hard to turn or won’t shut off completely. These small problems waste water, drive up bills, and get worse with time — especially in Paradise Hills New Mexico, where hard water accelerates the wear on every fixture in your home.

AG Plumbing & Heating provides professional toilet and faucet repair in Paradise Hills New Mexico and throughout the Albuquerque metro area. We’ve served homeowners in Rio Rancho, Albuquerque, and surrounding communities for more than 25 years. We understand the specific conditions that cause fixtures to fail here — and how to fix them right.

Schedule Your Service

Why Fixtures Fail Faster in Paradise Hills New Mexico

Albuquerque’s water supply is rated “very hard” by USGS, with calcium and magnesium concentrations between 180 and 220 parts per million. These minerals don’t just affect your water heater and pipes — they attack the small, precision components inside every faucet and toilet in your home.

How hard water damages fixtures:

  • Faucet cartridges — Mineral scale builds up on the ceramic or rubber seals inside the cartridge, causing leaks, stiff handles, and reduced flow

  • Aerators — The small screen at the tip of every faucet clogs quickly with scale, reducing water pressure and spray pattern

  • Toilet fill valves — Scale can prevent the valve from sealing properly, causing the toilet to run continuously

  • Flush valves — Mineral buildup can prevent the flapper from seating correctly, leading to leaks from tank to bowl

  • Shower valves — Scale inside the mixing valve causes hard-to-turn handles and temperature fluctuations

This is why fixtures in Albuquerque homes need more frequent repair than in areas with soft water.

What Toilet and Faucet Repair Costs in Paradise Hills New Mexico

Repair costs depend on the specific fixture, the problem, and whether replacement is needed.

Based on 2026 pricing data for the Albuquerque market :

Service Typical Cost Range
Service call fee $50 – $150
Toilet rebuild (flapper, fill valve, seals) $100 – $225
Toilet removal and reinstallation $150 – $350
Faucet repair (cartridge, seals) $150 – $250
Faucet replacement $125 – $325
Shower valve repair $200 – $400
Shower valve replacement $300 – $600+

Factors that affect the final cost:

  • Fixture type and brand — Some cartridges cost more than others

  • Accessibility — Fixtures behind cabinets or in tight spaces take longer

  • Whether parts are stocked — Common cartridges are usually on the truck

  • Whether replacement is necessary — A full faucet replacement costs more than a repair

Schedule Your Service Now

Signs You Need Toilet or Faucet Repair

Some fixture problems are obvious. Others give warning signs first.

Toilet problems that need repair:

  • Running constantly — Usually a worn flapper or faulty fill valve. Wastes hundreds of gallons per day

  • Weak or incomplete flush — Often a clogged rim jet, low water level, or failing flapper

  • Water pooling around the base — Indicates a failed wax ring seal

  • Wobbling toilet — Loose closet bolts that need tightening or the flange may need repair

  • Ghost flushing — Toilet refills on its own without being used

Faucet and shower problems that need repair:

  • Dripping when closed — Worn cartridge, seat, or O-ring

  • Stiff or hard-to-turn handles — Mineral scale inside the cartridge

  • Reduced water pressure — Clogged aerator or scale buildup in the cartridge

  • Water leaking from the base or handle — Failed seals or loose packing nut

  • Shower temperature swings — Worn mixing valve or pressure-balancing cartridge

If you’re noticing any of these signs, schedule a toilet and faucet repair appointment before the problem gets worse.

    Schedule Your Service Now

    DIY vs. Professional Repair

    Some fixture repairs are reasonable DIY projects. Others require professional tools and experience.

    DIY-friendly repairs:

    • Replacing a toilet flapper — $10-$20 part, simple to install

    • Replacing a toilet fill valve — $15-$30 part, moderate difficulty

    • Cleaning or replacing a faucet aerator — Easy, no tools required

    • Tightening a loose toilet seat or handle

    Call a professional for:

    • Cartridge replacement — Requires disassembling the faucet and matching the correct replacement part

    • Shower valve repair — Involves opening the wall and working with pressurized lines

    • Toilet removal and reinstallation — Requires handling the wax ring and closet flange

    • Any repair involving the water supply line or shut-off valve

    If you’re not sure whether a repair is DIY-friendly, it’s worth calling for advice. A wrong repair can cause water damage that costs far more than the original fix.

      Repair vs. Replace: Making the Right Decision

      Not every fixture problem requires replacement. Here’s how to think about it:

      Repair makes sense when:

      • The fixture is less than 10-15 years old

      • The problem is isolated (a single failed component)

      • The finish and body are in good condition

      • Repair cost is significantly less than replacement

      Replacement may be smarter when:

      • The fixture is 15+ years old and parts are hard to find

      • Multiple components are failing

      • The finish is worn, chipped, or corroded

      • You want to upgrade to a water-efficient model

      If you’re considering replacement, we can help you choose fixtures that will hold up better against Albuquerque’s hard water.

        Schedule Your Service Now

        What to Expect During a Service Call

        Here’s how a toilet or faucet repair visit works with AG Plumbing & Heating:

        • Diagnosis — Our technician inspects the fixture, identifies the problem, and explains what’s happening.
        • Upfront pricing — We provide a flat-rate or written estimate before any work begins.
        • Repair — We complete the repair using quality parts matched to your fixture.
        • Testing — We verify the repair works correctly — no drips, no leaks, no running.
        • Cleanup — We leave your bathroom clean and tidy.
          Schedule Your Service Now

          Related Plumbing Services

          AG Plumbing & Heating provides a full range of services for New Mexico homeowners:

            Schedule Your Service Now

            Areas We Serve

            AG Plumbing & Heating provides toilet and faucet repair and other services throughout the Albuquerque metro area, including:

              Frequently Asked Questions

              Why does my toilet keep running?
              The most common cause is a worn flapper that no longer seals against the flush valve. A toilet rebuild kit ($15-$30 in parts) usually fixes it. If the fill valve is also failing, a full rebuild may be needed .

              Why does my faucet drip even when it’s closed?
              Hard water scale damages the cartridge or seals inside the faucet. Replacing the cartridge usually fixes the drip. In Albuquerque, cartridges may need replacement more often than in areas with soft water .

              Can I replace my own faucet?
              Replacing a faucet is a moderate DIY project if you’re comfortable with basic plumbing. However, it requires shutting off water, disconnecting supply lines, and properly sealing the new fixture. If you’re unsure, a professional installation prevents leaks and water damage.

              How much does it cost to fix a running toilet in Albuquerque?
              A basic toilet rebuild typically costs $100-$225, including parts and labor. This usually covers a new flapper, fill valve, and seals .

              When should I replace instead of repair my toilet?
              If your toilet is 15+ years old, needs frequent repairs, or uses more than 1.6 gallons per flush, replacement may be more cost-effective. Modern low-flow toilets can also reduce water bills.

              Do you repair shower valves?
              Yes. Shower valve repair typically costs $200-$400. If the valve body is corroded or the repair requires opening the wall, replacement may be more practical .

              Schedule Toilet and Faucet Repair in Rio Rancho, NM

              If your toilet or faucet isn’t working properly, AG Plumbing can identify the problem and provide professional repairs to restore dependable performance. Whether you’re dealing with leaks, running toilets, or dripping faucets, we’re here to help keep your plumbing system working efficiently.

              Contact AG Plumbing in Rio Rancho, NM, to schedule your toilet and faucet repair service.

              Schedule Your Service